YAG / Green / End-pumped laser control board with rotary / fly mark
Digital laser engraving card can control co2 or yag laser machine
for laser marking and laser engraving .The software EZCAD Support
CO2,YAG,IPG,SPI laser, adjusting currents, frequency, duty ratio in
- Data transfer:usb2.0 interface
- Digital output used for scan head
- Support FPK with three ways [optional]
- Support high-speed fly marking with rotary encoder
- Eight digital input and seven digital output used for other
- 25 routes general digital signals(TTL compatible), 4 of the IO
ports can be OC IO, can connect with relay .
- LASER Signal:TTL,used for laser On/Laser Off .
- PWM Signal:TTL,used to adjust the frequency and duty ratio.
- Tow Direction/Pulse signals,used to control stepping motor.
- START Signal:used to connect foot switch
- Laser Marking
- Laser Engraving
- Rapid prototyping
- Drilling circuit board via holes
- Cutting cloth
- Cutting paper
Output digital signals for digital scan head.
Support single machine with multi-card.One computer work with 2
pieces of USBLMC card and marking different content.
Extend axis output: Two Direction/pulse signals,used to control
stepping motor or servomotor for rotary marking and split marking
12 routes general input signal.(TTL compatible)
13 routes general output signal (TTL compatible).4 Output can be OC
USB 2.0 Compatible
Power supply parameters:DC 5V/3A
Connector:USB connector/DB connector
Signal:25 routes general digital signal.(TTL compatible)
Storage Temperature: - 20℃ ~ + 60℃
Working temperature: 25 ℃ ± 10 ℃
DB 9 male/female sockets
USB cable (1.5m)
DB 15 male/female sockets
DB 25 male/female sockets
Good quality ,work stable ,famous software EZCAD.