Outside power supply ±15V / 500 mA
Input the 3 routes digital signal of Galvo.
Output the simulate ±5V control signal.
It supports maxim 3 routes outputs (default 2 routes), and the
digital protocol has the extended coding.
CON1: Digital input signal socket.
The socket must be connected with the Galvo output signal of
digital interface board, optic interface board. Using this
conversion board, we must set the Galvo protocol of digital
interface board, optic interface board to be None-extend encoding
format (not connect JP9).
CON2: Power socket.
We need connect outside ±15V power. The range of the voltage is
[±12V—±15V] which supplied by outside power.
CON4—CON6: Analog Voltage signal
Good quality ,work stable